Information

How to Install a Mower Mulching Blade

How to Install a Mower Mulching Blade


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Lawn mowers normally use two types of blades. These particles fall to earth under the lawn mower and act as a layer of mulch for the grass. Installing a mower mulching blade is something most any home gardener can do using tools available at home or at any home store.

  • Lawn mowers normally use two types of blades.
  • This is designed to cut the grass multiple times and turn the grass into fine particles.

Place the mower on a flat working area. The area should be at least double the size of the mower. Put on the eye protection and gloves. Remove the sparkplug wire from the sparkplug.

Turn the lawn mower on its side. Wedge the 6-by-2-inch wood block between the existing lawn mower blade and the lawn mower housing deck. The wood should be wedged in such a manner that the blade cannot move.

  • Place the mower on a flat working area.

Remove the nut at the center of the existing blade, using a socket wrench. Slide the existing washer from the post. Remove the existing blade from the post. Set aside the wood block. Save the nut and washer.

Place the mulching blade on the post. Reuse the existing washer and slide it on the post. Loosely screw the existing nut in place with the socket and socket wrench. Wedge the wood block between the new mulching blade and the side of the lawn mower deck. Place the socket on the torque wrench. Tighten the nut with the torque wrench to the load required in the lawn mower mulching blade documentation.

  • Remove the nut at the center of the existing blade, using a socket wrench.
  • Remove the existing blade from the post.

Roll the lawn mower back to its cutting position. Place the plug in the lawn mower ejection shoot to keep grass inside the lawn mower housing as it is being mulched.

Reattach the sparkplug wire to the sparkplug. Start the lawn mower. Ensure that the new mulching blade operates without any unusual vibration. Mow a portion of lawn to make sure that grass does not exit from the ejection chute.

Attach mulching blades to a riding mower by lowering the deck rather than turning the riding mower on its side.


Watch the video: A Common Mistake Made When Installing Lawnmower Blades! (May 2022).